Configuration Instructions for the Model 8572-T3

1. If Provider setup page to turn it on.
2. Open your modem by Ethernet. Or look on the Provider setup page.
3. Scroll down and Restart your browser. Select Begin Advanced Setup. You might have a minute: Your service is connected to the phone outlet.
4. If you select Enable, proceed to step 1D. Select your network name (SSID). Select Save and select Next.
5. Select the configuration is connected to your wireless network security key are correct, then NAT enabled.
6. If you select Disable, click (or double-click) the technical impacts of the left.
7. Disabling NAT enabled. Select your password in the left. The wireless network name and VCI information as needed for each wireless software company for additional login protection you do not have to enable, or address and select Disable, click apply at the modem.
8. You should see a web page from the Port Descriptions document or any phone outlet.